Skip to main content
Version: Next

LibreTime 3.0.0 alpha 4

This version was released the 2018-02-01.

info

Please report new issues and/or feature requests in the issue tracker.

Join our discourse or chat with us on our mattermost if you need help and for general discussion.

The full tarball for the 3.0.0-alpha.4 release of LibreTime is available here.

🚀 Features​

  • Updated Hungarian translations
  • Preview tracks in generated SmartBlocks
  • New icon to mark autoplaylist based show on calendar page
  • Relative date filters for Smartblocks

🐛 Bug fixes​

  • Fix updating track information from pypo on TLS only setups
  • Fix seeking in track preview
  • Fix advanced search in calendar mode
  • Validate contents of VERSION file to fix non-enriched git tarball install
  • dead code removal of legacy media-monitor code base

⚠️ Known issues​

The following issues may need a workaround for the time being. Please search the issues before reporting problems not listed below.

Outdated silan reports unreliable cue in/out information​

Out of the box the installer installs a broken, outdated version of silan on most Debian based Platforms (ie. Ubuntu). This affects all distros supported by the installer except Debian unstable which has the silan 0.3.3 and CentOS which does not have upstream packages and you may either install from source or use the 0.3.3 packages from RaBe APEL.

You can check the version of silan by running with silan --version which should report 0.3.3 or with sudo dpkg -s silan | awk '/Version/ {print $2}' that will show the exact package version you installed. Please include this information if you file bugs concerning silan.

There are multiple workarounds to this issue and a bug against the upstream has been fixed. Kyle Robbertze @paddatrapper has taken over maintainership of the silan packages in Debian as he is currently packaging LibreTime for Debian. The silan package is in testing as can be seen in the Debian PTS. This section will get updated once the package is in stable.

Until this is sorted you should pre-install silan from a source you trust. If your distro has not updated to 0.3.3 yet you can also help by asking your distros maintainers for a bump.

The following solutions have been reported to work.

Silan from OBS build (https://github.com/libretime/libretime/issues/177#issuecomment-299195796)​

Works for all relevant Debian and Ubuntu distros and installs silan 0.3.3~nmu1.

sudo apt-get update
sudo apt-get install apt-transport-https

# install package signing key from obs
wget -qO- https://download.opensuse.org/repositories/home:/hairmare:/silan/Debian_7.0/Release.key \
  | apt-key add -

# add OBS repo to sources list (pick the distro you need)

# Debian Stretch
echo 'deb https://download.opensuse.org/repositories/home:/hairmare:/silan/Debian_9.0_standard/ ./' \
  > /etc/apt/sources.list.d/hairmare_silan.list
# Debian Jessie
echo 'deb https://download.opensuse.org/repositories/home:/hairmare:/silan/Debian_8.0 ./' \
  > /etc/apt/sources.list.d/hairmare_silan.list
# Ubuntu Xenial
echo 'deb https://download.opensuse.org/repositories/home:/hairmare:/silan/xUbuntu_16.04 ./' \
  > /etc/apt/sources.list.d/hairmare_silan.list
# Ubuntu Trusty
echo 'deb https://download.opensuse.org/repositories/home:/hairmare:/silan/xUbuntu_14.04 ./' \
  > /etc/apt/sources.list.d/hairmare_silan.list

# update local package database
apt-get update

# install silan 0.3.3 from obs packages
apt-get install silan

Local armhf builds for Raspberry Pi 3 (https://github.com/libretime/libretime/issues/214#issuecomment-305988355)​

Since build.opensuse.org can't build Debian packages on arm due to missing dependencies, the 0.3.3~nmu1 arm package was built in a docker crossdev environment. This is reported to work on Debian Jessie on a Raspberry Pi 3 Model B.

curl -L -O https://github.com/libretime/libretime/files/1049738/silan_0.3.3.nmu1_armhf.deb.tar.gz
tar xvf silan_0.3.3.nmu1_armhf.deb.tar.gz
sudo dpkg -i silan_0.3.3~nmu1_armhf.deb

Legacy upstream silan packages (https://github.com/libretime/libretime/issues/197)​

Legacy upstream hosts patched packages for Ubuntu Trusty on apt.sourcefabric.org. They install as 0.3.2~trusty~sfo-1.

sudo apt-get update
sudo apt-get install apt-transport-https

sudo tee -a /etc/apt/sources.list <<EOD
deb https://apt.sourcefabric.org/ trusty main
EOD

sudo apt-get update
sudo apt-get install sourcefabric-keyring
sudo apt-get update
sudo apt-get install --reinstall silan=0.3.2~trusty~sfo-1

Remove silan completely (https://github.com/libretime/libretime/issues/193#issuecomment-299174997)​

It is worth mentioning that you can disable cue point detection by removing silan from the system.

sudo apt-get uninstall silan

Reportedly this might have side effects.

Liquidsoap Support​

Libretime currently only supports liquidsoap < 1.3.0 out of the box. If you install a current version of liquidsoap using OPAM or through the Rabe Liquidsoap Distribution for CentOS (RaBe LSD) you will most likely have liquidsoap 1.3.2 or 1.3.3 installed.

#352 reports that liquidsoap < 1.3.0 can exhibit issues on some Debian based installs. One fix for the issue is to install liquidsoap 1.3.0 and to use the following patching steps. Kyle from silan fame is taking the needed steps to get liquidsoap maintained again in Debian so we expect the situation to improve over time.

You can check your liquidsoap version by running liquidsoap --version.

If you already have liquidsoap >= 1.3.0 you have a couple of options.

Liquidsoap 1.3.0 Patchset (#192)​

You can patch your installation of LibreTime to support liquidsoap 1.3.0.

An up to date patch is available through GitHub and can be applied to an unpacked tarball as follows.

cd libretime-3.0.0-alpha.4/
curl -L https://github.com/libretime/libretime/compare/main...radiorabe:feature/liquidsoap-1.3.0.patch | patch -p1

Git users can pull from the branch at https://github.com/libretime/libretime/compare/main...radiorabe:feature/liquidsoap-1.3.0 directly.

Install old liquidsoap from opam (#192)​

You can downgrade an OPAM install of liquidsoap by running the following command.

opam install "liquidsoap<1.3.0"

No watched folder support​

Currently LibreTime does not support watching folders. Uploading files through the web interface works fine and can be automated via a REST API. Re-implementing watched folder support is on the roadmap. Please consider helping out with the code to help speed things along if you want to use the feature.

No line in support​

Line In recording can be enabled in the UI but doesn't currently work. This feature went missing from LibreTime due to the fact that we based our code off of the saas-dev branch of legacy upstream and support for recording hasn't been ported to the new airtime analyzer ingest system. #42 currently tracks the progress being made on line in recording.

Playout won't work if locale is missing​

Some minimal OS installs do not have a default locale configured. This only seems to affect some VPS installs as they often do not have a locale setup in the default images provided.

You can set up the locale using a combination of the following command. You might also want to consult the documentation of your VPS provider as it may contain an official way to set up locales when provisioning a VPS.

# Set locale using systemds localectl
localectl set-locale LANG="en_US.utf8"

These instructions do not seem to work on all Debian based distros so you might need to use update-locale as follows.

#Purge all locales but en_US.UTF-8
sudo locale-gen --purge en_US.UTF-8
#Populate LANGUAGE=
sudo update-locale LANGUAGE="en_US.UTF-8"

Lack of i18n toolchain is disturbing​

Some translations might miss the tarball. They didn't get lost but the build chain needs fixing. Work is in #301 and additional work is needed as it has become clear that we proabably want to support bidirectional translation syncing with zanata.

📝 Colophon​

This is the first release that contains code contributions from more than 5 developers. Also, we reached 💯 🌟 a while ago and this is the fifth release since we forked almost a year ago. I'm looking forward to celebrating the one year anniversary of LibreTime soon.

A large thanks from RelEng goes to everyone who put their hard work into LibreTime both here on GitHub as well as on our Discourse. Cutting these releases wouldn't be half as rewarding without the constant feedback from the community.